Smallest .45 Handgun I've ever seen

[MLB]

I've a bit more research to do, but this "liberator" is one tiny .45

www.littlegun.be/arme%20americaine/a%20liberator%20gb.htm

[TBT]

Might be the ugliest 45 I've ever seen too.

[TMan]

Yes, and if you have one, complete with box and instruction sheet, and no rust, this $2 to make pistol is worth around $1,000 from what I've seen on TV. (Yes, occasionally I do watch something besides Fox News Channel).

From Wikipedia, the free encyclopedia:

The FP-45 Liberator was a pistol manufactured for the United States military during World War II.

The pistol was designed for the United States Army in 1942 by the Inland Guide Lamp Manufacturing Division of the General Motors Corporation in Dayton, Ohio. Interestingly, the army designated the weapon the Flare Projector Caliber .45 hence the designation FP-45. This was done to disguise the fact that a pistol was being mass produced. The original engineering drawings label the barrel as "tube", the trigger as "yoke", the firing pin as "control rod", and the trigger guard as "spanner". The Guide Lamp Division plant in Anderson, Indiana assembled a million of these weapons. The Liberator project took about 6 months from concept to end of production with about 11 weeks of actual manufacturing time, done by 300 workers.

The weapon was a crude, single shot pistol designed to be cheaply and quickly mass produced. The Liberator had just 23 parts. The weapon largely used stamped and turned steel parts that were cheap and easy to manufacture. The weapon fired a .45 caliber pistol cartridge from an unrifled barrel. Due to the unrifled barrel, maximum effective range was only about 25 feet (less than 8 meters). In reality, the actual effective range was closer to about 10 feet (3 meters). After that, the oblong .45 caliber bullet (designed for a rifled barrel) would begin to tumble out of control ("keyholing").

The Liberator was shipped in a cardboard box with 10 rounds of .45 caliber ammunition, a wooden dowel to remove the empty shell casing, and an instruction sheet showing how to load and fire the weapon. Excess rounds of ammunition could be stored in the pistol grip.

After production, the Army turned the Liberators over to the OSS. A crude and clumsy weapon, the Liberator was never intended for front line service. It was originally intended as an insurgency weapon to be mass dropped behind enemy lines to resistance fighters in occupied territory. The resistance fighters were to recover the weapons, sneak up on an Axis occupier, kill him and retrieve his weapon.

The weapon was valued as much for its psychological warfare effect as its actual field performance. It was believed that if vast quantities of these weapons could be delivered into Axis occupied territory, it would have a devastating effect on the morale of occupying troops. The plan was to drop the weapon in such great quantities that occupying forces could never capture or recover all the weapons. It was hoped that the thought of thousands of these unrecovered weapons potentially in the hands of the citizens of occupied countries would have a deleterious effect on enemy morale.

In reality, the OSS never saw the practicality in mass dropping the Liberator over occupied Europe, and only a handful were ever distributed. Only the Chinese and resistance forces in the Philippines received the liberator in any significant quantity. The Liberator was never issued to American or Allied troops and there is no known instance of the weapon ever actually being used in combat.

The original delivered cost for the FP-45 was $2.10/unit ($26 in 2005). A Liberator in good condition today can fetch several hundred dollars from a collector, and, if in especially pristine condition, with the original box, prices in excess of $2,800 have even been reached in Internet auctions.

An interesting fact about the Liberator is that the factories could produce one faster than the weapon could be loaded and fired. Building the pistol took about six or seven seconds whilst loading took about 10 seconds.

It was replaced by the "Deer Gun", which was in 9mm (go figure):

CIA Deer Gun
How this pistol came to be called the Deer gun is a mystery.

It was manufactured in the early 1960s for the CIA. (Some Say by Winchester Repeating Arms.) The intended use was for clandestine operations in Southeast Asia. It had a CIA catalog listing as "Pistol, 9 millimeter, [FSN] 1395-H00-9108, Parabellum, single shot, 2.0 in. barrel, reloadable, c/w 3 cartridges in grip, packed for air drop." It was packed in a polystyrene box with three cartridges and an instruction sheet. It could be air dropped, and if it landed in water it would float.

The Deer Gun (sometimes spelled Dear Gun) is a very interesting replacement for the Liberator Pistol. Research indicates it was developed for the CIA in the early 1960s. The Liberator Pistol book contains pictures of the pistol as well as a single-page instruction sheet (similar to the one packed with the Liberator pistol) and a 16-page instruction book written in Vietnamese.

For more information on the Liberator:

home.pacbell.net/rlhag65/liberator.html