454 Casull 335 gr. CPB reloads

[dogman]

Has any one loaded CPB 335 Gr. in 454. I did some about 5 yrs. ago but know that what was considered safe then is not now. Due to Ruger and taurus not being as strong as others. I have two BFR DM series pistols. One ten inch with Mag-naport 4 slot, Luepold 2.5 to 8, action job and chambers numbered and a 6.5 with same except for scope. any information would be appreciated. Thanks. Sorry about the rambling around.
Dogman

[5ontarget]

I looked on Magnum Research's webpage, and they give pretty much the standard reply

Can I shoot reloads in my BFR revolver?
I am sorry we do not offer any reloading information since we do not recommend reloading in any of our products. Any use of reloads (problems caused by them) null and void the warranty on any MRI product. However, if you are going to reload we suggest you strictly follow all safe reloading information in a good up to date reloading manual.

you can do an online search of IMR/winchester/Hodgdon powders.

data.hodgdon.com/cartridge_load.asp

Or check
www.wwpowder.com/data/handgun/454cas.php

[dogman]

Thanks Sontarget
I have already done that and everyone is cutting back the loads because of the Rugers and Taurus guns are weaker. 5 years ago it was 28 grs of 296 now it is 26 max.
The cylinder of the BFR is bigger in diamater and longer than the Freedom Arms, but without knowing the exact metalurgy or heat treatment, it's hard to justify, I guess I will try one and chronograph it and check pressure. Been reloading for 40 years and have not had to pull any apart yet due to not being stupid.