How do I adjust windage adj sight.

[TMan]

After shooting the CZ75 the last time, and consistently missing the plates, I discovered that the rear sight is too far to the left. Naturally, as a conservative, this can not be tolerated.

I used a hammer and a plastic drift and tried to drift the sight to the right. I might have had better luck trying to move Ted Kennedy to the right.

Looking at the Brownells' web site, they have a sight mover tool the looked like it would work, but they want $590 for it. www.brownells.com/aspx/ns/store/ProductDetail.aspx?p=6841&title=UNIVERSAL+SIGHT+INSTALLATION+TOOL

I could buy a Sig 239 with Night Sights for that much money.

I have a vise, I have a 20 ton press, what I don't have is a clue on how to move this sight over a tad. I really don't want to take it into my gunsmith - I've seen that kind of smile on his face before. Can someone help?

["DoubleAction"]

TMan; From what it sounds, I have to assume the sight is inserted from the left side. I would try to remove it, clean the dove tail channel out ( Might be some loc sealer in the small grooves to prevent the sight from becoming loose ), and reinstall it by using the same method you tried the first time.

[MLB]

... or you could just bent the front blade over a bit to match...