|
|
Post by "DoubleAction" on Sept 2, 2009 0:07:41 GMT -5
"EGW firing pin stops are wider to prevent extractor movement. That means more reliable ejection! The stop is thicker to eliminate lateral movement as well. Radius corners prevent cracking so it lasts longer too. The back corner is square to slow the slide opening. 48 Rc scale. Fits Series 70, 80 in Super 10 and .45 (Blue)."
|
|
|
|
Post by "DoubleAction" on Sept 2, 2009 21:31:10 GMT -5
"EGW firing pin stops are wider to prevent extractor movement" Not only will this Firing Stop will prevent the extractor from clocking, it will prevent the slide from locking up on the recoil. The firing on the 1911 works off a inertia, which means the firing is the only thing which holds the Firing Pin Stop in. As soon the hammer strikes the pin, there is nothing holding the firing pin stop in. A faulty Firing Pin Stop will cause the firing pin stop to fall between the hammer spur and immediately put the pistol out commission, when you least expect it.
That is how I was introduced to the EGW Firing Pin Stop; Now I use it exclusively in most of my 1911 pistols. |
|
|
|
Post by natheeMoli on Jan 22, 2019 10:25:07 GMT -5
[cut - spam]
|
|
